SeaLife dc310 - sl145 Digital underwater camera takes amazing bright, colorful pictures just simply any ware and in any weather, let it be on land photography or underwater photography, dc 310 / sl 145 ReefMaster Digital Camera is amazing. Mode, as recommended by the camera manufacturer.Ģ) You may also need to change the White Balance setting toĭAYLIGHT depending on the camera's underwater colorĬorrection or if pictures/video turns out red.SeaLife ReefMaster DC310 Digital Underwater Camera - SL145 was espacially developed for those who love to scuba dive and love the underwater photography. Theįisheye lens allows you to get closer to the subject and fit moreįor SeaLife camera with external light accessory (No external flash):ġ) Set the camera's scene mode to Sea mode or Snorkel modeĢ) Change camera's PHOTO and VIDEO White Balanceįor SeaLife camera with external light and flash accessories:Ģ) Change the VIDEO White Balance setting to DAYLIGHT.ġ) Set the Scene mode to "Auto" or "Underwater" scene Set-up is a combination of a light plus flash.Ĭonsider purchasing the SeaLife Wide Angle Lens (SL975). (dual lights) or/and external flash accessory. If you are using only one light, considering adding another light Keep your shooting distance inside of 2ft to 3ft, depending on There are advanced color correction modes, Please feel free to contact me if you need further information If this does not resolve your problem, there might be a short in the switch circuit and the camera will need to be disassembled to resolve this error. Look into the sd slot and if you can see the switch, use a needle to pull the little tab down toward the base of the camera by about 2mm or until it works being careful not to bend it. It is incredible difficult to fix this switch because of space limitations in the sd card. If you put a locked card into a camera without a sd lock switch, you would still be able to use the card normally.
When locked card is inserted, the tab is depressed and tells the camera that the card is lock.Ĭontrary to popular belief ,the little tab on the sd card is not an electronic switch and does not physically influence the card operation itself. When no card is inserted / no write protection, the switch is open and thus the protection is off.Ģ. If you open you sd slot and look inside with a sharp light, you should be able to see on the left side of the slot there is a little copper or spring steel lever switch. the problem is with your card reader in your camera. If the error is still displayed after you did the above, you might want to try the card in another camera. All you need to do is to take out the memory card and switch the lever on the left side to the unlock.
OK, if the memory card itself is locked, you might sometimes get this error code.
0 kommentar(er)
